There is no description available for this product.
Lock ring for the right side on a Shimano Nexus 7 gear hub. # 27 on the picture. Fit: (among...
Large nut for SRAM P5, S7 and T3. 10.5mm shaft.
Brake band for frame on 15 mm in diameter. Bolt and nut is not included.
Brake lever for Torpedo hub. Made of steel.
Locking ring for Nexus 9 mm. Fits, among others, SG-7C18 and SG-3C40
The set contains 2 ball bearings in the size 3/16 "and a small tube of lithium grease to...
Nut for mounting of Nexus3 SG-3R40
Mounting set for Srams Automatix 2-speed hub Contains 2 x Closed nuts (M10) + 2 x washers
Inner bearing in the right side for Nexus 3 with coaster brake
C-clips for Shimano Nexus 7 gear hub. Fit: (among others) SG-7R42 SG-7R45 SG-7R50
Ball bearing with 9 ball in the size: 7/32". Fit CB-E110
Shimano dust cap for roller brake hub. Mounted instead of the roller brake and thus protects the...
Dust cap for the right side on Shimano Nexus 8 gear hub. Fit among others: SG-8R20 SG-S501...
Shimano bal bearing with 26 balls in the size 3/16". Fit among others: SG-8C20 SG-8C31 SG-8C45...
Shaft nut SA to the right side AT-3 and AWC. Fits 3 gear hubs.
Total length: 140 mm Thread: 20 mm Chain: 50 mm Pin: 65 mm Fit Sturmey Archer
Sturmey Archer indicator chain SA AT-3 & AWC Mk III Total length: 135 mm Thread: 20 mm Chain:...
Shimano ball bearing with 10 ball in the size 7/32". Fit among other: SG-3C40
Ball bearing and retainer for Shimano Nexus 7 gears 1 pc. Fits: SG-7C16 SG-7C2...
Shimano conus M495 that fits the HB-M475 hub. M10 x 10.4mm The part is No. 5 in the picture.
Ball bearing with 13 kugler in the size 3/16". For Shimano Nexus 8 gear hub. Fit among other:...
Brake arm unit for SG-7C30 Nexus
Locking ring for Shimano Nexus 7 and Nexus 8 gear hubs. Fit among othersSG-5R30 SG-5R35...
Component set for in-motion 3 gearhub from SRAM
Shifting rod for SRAM 5 gear systems. Also compatible with Spectra and Super 5.
Locknut to SRAM gear hub, 10,5mm
Axle lock washer for Sram i-MOTION 3
Total length: 145 mm Thread: 20 mm Chain: 40 mm Pole: 60 mm Fit Sturmey Archer
Shimano ball bearing with 7 balls in the size 1/4". Left ball bearing in a 3 and 4 gears hub. Fit...
Sram cone for 3 gears hub, for the chain side.
Brake clamp for brake arm with internal gears. Fit frames with a diameter on up to 22,2 mm.
Bearing with 16 balls from Shimano for Nexus SG-C3000-7C. 3/16 ".
Dust cap for Shimano hub: FH-IM70 It is the marked part on the picture - number 22. Fit among...
To gear hub and cable. Regulating sleeve mounted on the gear wire and secured with an Allen screw ....
Fit both 5 and 7-gears clickboxes from SRAM
Fit: (among other) SG-5R30 SG-7R50
Total length: 145 mm Thread: 20 mm Chain: 40 mm Pin: 70 mm
Total length: 145 mm Thread: 20 mm Chain: 40 mm Pipe: 75 mm Fit Sturmey Archer
Compression fender ( small ) sram/torpedo 3-gears
Shimano Nexus 8 cassette joint with Nordic cable seal CJ-8S40. With better assembly than standard...
Fit among other on: SG-7R50 SG-C6000-8R
Left Conus for Shimano Nexus 7 gear hub. Fits: SG-C3000-7R
Shimano Dustcap for Nexus 8 SG-8R22.
Inner cone for right side of Nexus 3. Fit among others on: SG-3R40 SG-3C41
Shimano component set Nexus 8 CJ-8S20 Standard. Fits Alfine 8 speed (SG-S500 B-type) Fits Nexus 8...
Gasket for DT Swiss Star Ratchets hub. 190 / 240s The gasket has the size 30x36x2.5 mm
Axle nose wheel for SRAM gear hub - stainless. 20 x 2,5 x 10,6
Shimano 8L green lock ring for the left side. Fit: (among others) SG-5R30 SG-5R35 SG-S501...
For SG-8R36 Nexus 8 rear hub And: SG8C20 SG8C31 SG8C45 SG8R20 SG8R25 SG8R31 SG8R36 SGC6000 SGC6010...
AT-3
Shimano locking disc for Nexus hub blue. Fit: SG-5R30 SG-5R35 SG-8R20 SG-8R22 SG-8R25 SG-8R27...
Driver for Shimano Nexus 7 gearhub. # 16 on the picture Fit: (among others) SG-7R46 SG-7R50
Ball bearing with 14 ball in the size 3/16". For Shimano Nexus 3 gear hub. Fit among other: SG-3C40...
Sturmey Archer Indicator Chain 5 gears.
Lock washer for Shimano Nexus 7 hub, left side. Gray.
Dust cap for Nexus 7 gear hub Fit among others: SG-7C26 SG-7R50 SG-C3000-7R
Brake shoes for the foot brake on a Shimano SG-C3000-7C gear hub.
Sturmey Archer HSL871 dust cover. Fits i.a. for Duomatic S2C Kick back 2 speed.
Ball ring with 26 balls in the size 3/16 ". C3001-7
NEXUS 7 gear hub left side Fits: SG-7R40 - SG-7R41 - SG-7R42 - SG-7R43 - SG-7R44 - SG-7R45
Push pin for Nexus 3 gears hub for axle width 192.6. The push pin is 90.75mm long.
Coaster brake band for frames with a diameter on 22 mm. Bolt and nut aren't included.
Driver unit for Nexus 3 gear hub model, SG3C.
Model: SG-3R40 and Sg-3C41,86,85mm for 175mm axel.
Nut for Sram I Motion 3 M10
20 pcs. cable ties from Shimano. The zip ties are used to hold cables from Shimano Di2
Cone for driver for Sram S7 / P5 gear hub.
The large dust cap mounted before the cog.
Shimano internal assembly for Nexus 3 gear hubs. Axle length: 175 mm Fit among others: SG-3C40...
The gear wheel fits to most of the bikes with internal gear like, SRAM, Torpedo, Nexus and types...
16 | 17 | 18 | 19 | 20 | 21 | 22 | 24
Shimano wheel nut for Nexus rear hub in original Shimano quality. 3/8" threading, which is used for...
Driver for Sram S7 hub.
The nut fits to SRAM 3, 5 and 7 gear gearhub 10,5 mm.
For gear hub and cable. This regulation chamber is mounted on the gear wire and fastened with an...
Pushpin for Nexus 3 gears hub for axle width 170.3 mm. The pin is 81.85 mm long.
Brake arm for S7 and T3
Rolle to indicator chain SRAM T3
Right hand hub cup for Shimano Nexus 7 gear hub. The cup measures: 73x15 mm. Fit among other:...
Cavo indicator chain for Sram T3 short Short model with thread and nut The length of the pin is: 40...
Indicator chain for Sram T3 internal gear hub. The pin has a length of: 74 mm
For Sram / Torpedo / Sachs 3, 5 and 7 gear. External diameter 45.2 mm Fit 3, 5 and 7...
Brake cone Sram/Torpedo 3 gear
Shifting rod for SRAM 7 gear. Also called Spectra and Super 7. Piece rods for S7 Shifting rod set.
Brake cylinder Sram 3G Steel Torpedo
Fits for Torped 3- and 5 gear on the right side
Component for Shimano Nexus 7 hubs with coasterbrakes Fits model: SG7C25. CJ-NX10.
Shimano 7R black locking ring for right side. Fit among other: SG-5R30 SG-5R35 SG-7R50...
3 parts CJ-NX10 Fits SG7C16, SG7C18, SG7C22, SG7C26, SG7C30, SG7R46, SG7R50
Shimano CJ-NX40 kassettejoint. Fit: (among others) SG-7C21
Shimano Nexus internal assembly for 8 gears SG-8C31 hub For coaster brake.
Cone SG-7C/R Seal is included
Locking ring for cog Can be used with both Sram and Shimano Nexus gear. First you mount the cog,...
Complete internal assembly for SG-3R40 Nexus 3 hub with rolling brake. Axle: 176.8 mm
Shimano hub insert SG-C3001-7R 182 mm Fits blah. for the following Nexus 7 gears hub SG-7R40...
Locking ring Dust jacket Locking disc Nut (Dome Nut)
Fits SG-3C41 hub ect.
Brake cone Sram P5/S7 For hub produced later than Sept. 2005
Internal assembly SG-3C41 168 mm Nonturn washer 168 mm Nexus 3 Model year: 2004 For coaster...
Component set for hub with freewheel Model: SG7R45,CJNX40. The set consists of following...
Component set with all the parts on the picture. For Afline 11-speed gear hubs.
Consists of all parts on the picture.
Fit among others: SG-3C40 SG-3C41
For hub with rolling brake. SG-8R35/8R36 Internal assembly for Shimano Nexus 8-gears rear hub...
SG7/4 Fit 7 and 8 gears Nexus hub. Fit among other: SG-5R30 SG-5R35 SG-7C30 SG-7R50...