Fits to all bikes with internal gear for example, Shimano nexus 1/2 x 1/8 114 links
Shifting rod for SRAM 7 gear. Also called Spectra and Super 7. Piece rods for S7 Shifting rod set.
Locknut to SRAM gear hub, 10,5mm
Incl. clickbox by the rearwheel New model which replaces the old models. SL-3S42E nexus revo grip...
Size 1/2" x 1/8" Stainless Pin width 9,2mm. If you´re tired of rusty chains, then this is your...
Cable: 1600 mm long Replaces the earlier models of Shimano Nexus 7 gears twist grip, also called...
KMC Rust Buster chain protected against rust. 112 links. 1/2 x 1/8: Fit all internal gear systems...
Sturmey Archer drejegreb, which fit SRAM S7 gear. Clickbox and 1700 mm wire is included.
For Sram / Torpedo / Sachs 3, 5 and 7 gear. External diameter 45.2 mm Fit 3, 5 and 7...
Fits for Torped 3- and 5 gear on the right side
Kæde PC1 AM incl. connecting link. For bikes with internal gears (hub gear) like SRAM og Nexus....
Fit both 5 and 7-gears clickboxes from SRAM
KMC chain for Internal gear or Single Speed systems 1/2" x 1/8 Made of stainless steel for minimum...
To gear hub and cable. Regulating sleeve mounted on the gear wire and secured with an Allen screw ....
Locking ring for cog Can be used with both Sram and Shimano Nexus gear. First you mount the cog,...
Component for Shimano Nexus 7 hubs with coasterbrakes Fits model: SG7C25. CJ-NX10.
Shifting rod for SRAM 5 gear systems. Also compatible with Spectra and Super 5.
3 parts CJ-NX10 Fits SG7C16, SG7C18, SG7C22, SG7C26, SG7C30, SG7R46, SG7R50
Twist shift lever with inner wire for Shimano's Nexus 7 internal gearhubs. With an indicator, which...
Model: SG-3R40 and Sg-3C41,86,85mm for 175mm axel.
There is no description available for this product.
NEXUS 7 gear hub left side Fits: SG-7R40 - SG-7R41 - SG-7R42 - SG-7R43 - SG-7R44 - SG-7R45
Coaster brake band for frames with a diameter on 22 mm. Bolt and nut aren't included.
Component set for hub with freewheel Model: SG7R45,CJNX40. The set consists of following...
Sturmey Archer swivel that fits SRAM P5 gear. Including clickbox. 1700 mm.
Unoriginal Torpedo shift lever. SACHS / SRAM 3 gears nav T3. 1950 mm. gearwire included.
Ball bearing and retainer for Shimano Nexus 7 gears 1 pc. Fits: SG-7C16 SG-7C2...
For gear hub and cable. This regulation chamber is mounted on the gear wire and fastened with an...
Shimano Nexus shift lever Silver SLC30007 CJ-NX40 Fits CJ-NX40 cassette joint, with rubber...
Brake band for frame on 15 mm in diameter. Bolt and nut is not included.
Shimano Nexus shift lever Black SLC30007 CJ-NX40 Fits CJ-NX40 cassette joint, with rubber...
Ball bearing with 14 ball in the size 3/16". For Shimano Nexus 3 gear hub. Fit among other: SG-3C40...
Shimano bal bearing with 26 balls in the size 3/16". Fit among others: SG-8C20 SG-8C31 SG-8C45...
Swivel handle black 7s SL-C3000-7 Nexus Fits CJ-NX10 There is an outer cable, wire and...
Classic wide chain 1/2 "x 1/8" for city or fixed bicycles with freewheel hub (torpedo), ...
Shifting lever for Nexus 7 internal gears With thumb shifting for both up and down. Everything for...
Rolle to indicator chain SRAM T3
Pushpin for Nexus 3 gears hub for axle width 170.3 mm. The pin is 81.85 mm long.
Miche Pista track / track chain. 1/2 x 1/8 " Pin length 8.6 mm.
Dust cap for Nexus 7 gear hub Fit among others: SG-7C26 SG-7R50 SG-C3000-7R
Ball bearing with 13 kugler in the size 3/16". For Shimano Nexus 8 gear hub. Fit among other:...
Inner bearing in the right side for Nexus 3 with coaster brake
Locking ring for Shimano Nexus 7 and Nexus 8 gear hubs. Fit among othersSG-5R30 SG-5R35...
Mounting set for Srams Automatix 2-speed hub Contains 2 x Closed nuts (M10) + 2 x washers
Chain from KMC in extra strong quality made for electric bikes. 1/2 "x1 / 8" Can be used on boats...
Chain from KMC specially developed for electric bikes with center motor. This is suitable for...
KMC chain in brown. 112 links. Pin length: 8.6 mm. 1/2 "x1 / 8"
SG7/4 Fit 7 and 8 gears Nexus hub. Fit among other: SG-5R30 SG-5R35 SG-7C30 SG-7R50...
BBB E-Powerline chain for e-cykler with internal gearing Extra strong chain plates, 136 links,...
Rotary handle with gearwire and clickbox for Shimano 3 gears internal gearsystems,...
AT-3
Shimano CJ-NX40 kassettejoint. Fit: (among others) SG-7C21
Nut for mounting of Nexus3 SG-3R40
Single Speed chain, which among others fit internal gear systems, like fixie, trail, BMX, etc. Very...
Cone SG-7C/R Seal is included
Shimano internal assembly for Nexus 3 gear hubs. Axle length: 175 mm Fit among others: SG-3C40...
Axle lock washer for Sram i-MOTION 3
Shimano ball bearing with 7 balls in the size 1/4". Left ball bearing in a 3 and 4 gears hub. Fit...
Fit among others: SG-3C40 SG-3C41
Rveo grips for NEXUS and Alfine 8 internal gears Twist handle 1520 mm cable Fits standard 22.2...
Shimano ball bearing with 10 ball in the size 7/32". Fit among other: SG-3C40
Rotary handle for Shimano Nexus 8 also called Revogreb...
Sunrace chain for internal gears. Narrow version 1/2 x 3/32 "
Right hand hub cup for Shimano Nexus 7 gear hub. The cup measures: 73x15 mm. Fit among other:...
Sturmey Archer indicator chain SA AT-3 & AWC Mk III Total length: 135 mm Thread: 20 mm Chain:...
Brake cylinder Sram 3G Steel Torpedo
Push pin for Nexus 3 gears hub for axle width 192.6. The push pin is 90.75mm long.
Inner cone for right side of Nexus 3. Fit among others on: SG-3R40 SG-3C41
KMC chain in brown. 112 links. Pin length: 7.3 mm. 1/2 x 3/32 ".
Single Speed chain, which fit internal gear systems, Fixie, trail, BMX among several other types....
Dust cap for the right side on Shimano Nexus 8 gear hub. Fit among others: SG-8R20 SG-S501...
Component set for in-motion 3 gearhub from SRAM
XLC E-Bike Chain for internal gear or Single Speed. Long chain with 124 links. Ideal for...
Fit among other on: SG-7R50 SG-C6000-8R
Total length: 145 mm Thread: 20 mm Chain: 40 mm Pole: 60 mm Fit Sturmey Archer
XLC E-Bike Chain for internal gear or Single Speed. Long chain with total 136 links....
The large dust cap mounted before the cog.
Internal assembly SG-3C41 168 mm Nonturn washer 168 mm Nexus 3 Model year: 2004 For coaster...
Brake clamp for brake arm with internal gears. Fit frames with a diameter on up to 22,2 mm.
XLC E-Bike Chain for internal gear or Single Speed. Long chain with 132 links. Ideal for det...
Single Speed chain with 102 links that fits bicycles with internal gears or with just 1 gear. 1/2 x...
For SG-8R36 Nexus 8 rear hub And: SG8C20 SG8C31 SG8C45 SG8R20 SG8R25 SG8R31 SG8R36 SGC6000 SGC6010...
Shimano hub insert SG-C3001-7R 182 mm Fits blah. for the following Nexus 7 gears hub SG-7R40...
Ball bearing with 9 ball in the size: 7/32". Fit CB-E110
Compression fender ( small ) sram/torpedo 3-gears
Sunrace chain for internal gears. Standard version 1/2 x 1/8 ".
Shimano Nexus 3 internal gear hub. Model: SG-3C41 Foot brake. 36 holes Shaft length 168 mm. Gear...
Sram cone for 3 gears hub, for the chain side.
Consists of all parts on the picture.
Shimano chain that is reinforced to handle the large leverage you have on electrical bicycles. Made...
Sturmey Archer Indicator Chain 5 gears.
Locking ring Dust jacket Locking disc Nut (Dome Nut)
Shimano Nexus 7 gears hub. The hub is for use with foot brake. There are 36 holes for spokes....
For hub with rolling brake. SG-8R35/8R36 Internal assembly for Shimano Nexus 8-gears rear hub...
Shimano Nexus SL-C7000 swivel handle. Also called revo grip or revo shift. With window so you can...
Shimano component set Nexus 8 CJ-8S20 Standard. Fits Alfine 8 speed (SG-S500 B-type) Fits Nexus 8...
Shimano conus M495 that fits the HB-M475 hub. M10 x 10.4mm The part is No. 5 in the picture.
Left Conus for Shimano Nexus 7 gear hub. Fits: SG-C3000-7R
Gasket for DT Swiss Star Ratchets hub. 190 / 240s The gasket has the size 30x36x2.5 mm
Driver unit for Nexus 3 gear hub model, SG3C.
Brake cone Sram/Torpedo 3 gear
Cavo indicator chain for Sram T3 short Short model with thread and nut The length of the pin is: 40...
Ball ring with 26 balls in the size 3/16 ". C3001-7
Bearing with 16 balls from Shimano for Nexus SG-C3000-7C. 3/16 ".
Driver for Sram S7 hub.
Shift lever with inner wire for Shimano's Nexus 8 internal gears. With easy-to-read indicator.
Indicator chain for Sram T3 internal gear hub. The pin has a length of: 74 mm
Brake shoes for the foot brake on a Shimano SG-C3000-7C gear hub.
Fits SG-3C41 hub ect.
20 pcs. cable ties from Shimano. The zip ties are used to hold cables from Shimano Di2
Rapid Fire Plus Shift lever for Shimano For 8 speed internal gears / 8 gears rear CJ-S7000, SL-S7000
KMC chain with antirust treatment. Suitable for electric bikes. 110 links. 1 / 2x3 / 32 " Pn length...
Dust cap for Shimano hub: FH-IM70 It is the marked part on the picture - number 22. Fit among...
Component set with all the parts on the picture. For Afline 11-speed gear hubs.
Shimano dust cap for roller brake hub. Mounted instead of the roller brake and thus protects the...
Brake arm unit for SG-7C30 Nexus
Cone for driver for Sram S7 / P5 gear hub.
Large nut for SRAM P5, S7 and T3. 10.5mm shaft.
Total length: 145 mm Thread: 20 mm Chain: 40 mm Pipe: 75 mm Fit Sturmey Archer
Complete internal assembly for SG-3R40 Nexus 3 hub with rolling brake. Axle: 176.8 mm
Locking ring for Nexus 9 mm. Fits, among others, SG-7C18 and SG-3C40
Total length: 140 mm Thread: 20 mm Chain: 50 mm Pin: 65 mm Fit Sturmey Archer
Shaft nut SA to the right side AT-3 and AWC. Fits 3 gear hubs.
Fit: (among other) SG-5R30 SG-7R50
Shimano Nexus 8 cassette joint with Nordic cable seal CJ-8S40. With better assembly than standard...
Lock washer for Shimano Nexus 7 hub, left side. Gray.
Brake arm for S7 and T3
Driver for Shimano Nexus 7 gearhub. # 16 on the picture Fit: (among others) SG-7R46 SG-7R50
Total length: 145 mm Thread: 20 mm Chain: 40 mm Pin: 70 mm
Insert for the Nexus 7 C3000 series. Complete insert with all internal gear parts.
Shimano 8L green lock ring for the left side. Fit: (among others) SG-5R30 SG-5R35 SG-S501...
C-clips for Shimano Nexus 7 gear hub. Fit: (among others) SG-7R42 SG-7R45 SG-7R50
Brake cone Sram P5/S7 For hub produced later than Sept. 2005
The set contains 2 ball bearings in the size 3/16 "and a small tube of lithium grease to...
Sturmey Archer HSL871 dust cover. Fits i.a. for Duomatic S2C Kick back 2 speed.
Shimano locking disc for Nexus hub blue. Fit: SG-5R30 SG-5R35 SG-8R20 SG-8R22 SG-8R25 SG-8R27...
Brake lever for Torpedo hub. Made of steel.
Lock ring for the right side on a Shimano Nexus 7 gear hub. # 27 on the picture. Fit: (among...
Shimano Nexus internal assembly for 8 gears SG-8C31 hub For coaster brake.
KMC E101 WPT 1 speed chain. Perfect for the electric bike with internal gear. Extra stretch chain...
Shimano Dustcap for Nexus 8 SG-8R22.
