Spider from Spanish Rotor to mount a Rotor QX1 blade on a Specialized S-Works crankset. 76mm fixed...
Removal tool from Rotor that fits DUB. Can be mounted on a 3/8 socket wrench. Can also be used...
Rotor noQ chainring for outer position, the recommended inner chainring is 36 teeth....
Rotor noQ chainring to inner position. The chainring is 36 tooth. It has fixed dimensions...
Chainring from Rotor on 53 teeth for 110 BCD and 5 hole mounting. Must be used as an...
Charging cable for Rotor 2inPower wattmeter.
Rotor noQ chainring to inner position. The chainring is 34 tooth. It has fixed dimensions...
Spacers to put between Rotor crankset and crankcase for 3D / REX3 XC. The dimensions are 10 / 7.5...
Chainring from Rotor on 39 teeth for 110 BCD and 5 hole mounting. Must be used as an...
Rotor QXL shim for front derailleur. Can be used to move the...
Rotor noQ Chainring for outer position, the recommended inner chainring is 36 tooth....
Rotor NoQ Aero chainring with 52T Fixed dimensions 110 mm Fits the same with a 36T...
Crank bearings from Rotor. Fits BB86, BB89.5 and BB92 The outer diameter is 41 mm. Fits 30 mm....
Bolt from Rotor that fits the left pedal arm on their 2INpower crankset. 1 piece.
Spacer set for Rotor KAPIC crankset. This set is to be used when assembling your KAPIC crankset and...
Cover for Rotor 2InPower Charger connector. Put on so that no dirt and grime enters the socket,...
Oval Chainring from Rotor for 110 BCD and 4-hole mounting. This chainring is compatible...
These bearings fit bikes with BSA threads in the frame and 3D + Rotor crankset that has a 30 mm...
Rotor PF4630 crankcase: Fits the following crankcase types: PF30, BBright, BB386 Evo. Made with...
Rotor PF4224 crankcase is made from BB30 (Diameter 42 MM) for crankset with 24 mm shaft Shimano,...
Rotor PF4630 crankcase: Fits the following crankcase types: PF30, BBright, BB386 Evo Made of 100%...
Rotor ITA 30 crankcase. Fits frames with ITA thread and crankset with 30 mm shaft. Compatible with...
With this chainring made in a simple design for Direct Mount crankset saves up to 40...
Threaded Pressfit crankcase from Rotor. Fits the following crankcase type: PF30 Crankcase diameter...
Oval blade from Rotor for 110 BCD and 4-hole mounting. This chainring is compatible with the...
Rotors QX1 is 12.5% oval and this gives you a more efficient thread in the pedals on inclines and...