Large nut for SRAM P5, S7 and T3. 10.5mm shaft.
There is no description available for this product.
Mounting set for Srams Automatix 2-speed hub Contains 2 x Closed nuts (M10) + 2 x washers
Component set for in-motion 3 gearhub from SRAM
Shifting rod for SRAM 5 gear systems. Also compatible with Spectra and Super 5.
Locknut to SRAM gear hub, 10,5mm
Axle lock washer for Sram i-MOTION 3
The price is for one pcs. Fits 6, 7 and 8 gear cassettes.
Sram cone for 3 gears hub, for the chain side.
Sram GXP Spacer kit Set with 2 pcs
To gear hub and cable. Regulating sleeve mounted on the gear wire and secured with an Allen screw ....
SRAM Wide / narrow racer chainring for crankset with 1 chainring and cassettes with...
The price is for a set of two pads. Without spring and bolt
Fit both 5 and 7-gears clickboxes from SRAM
Set price. Color: Gold
Compression fender ( small ) sram/torpedo 3-gears
For right side, Torpedo 3 gear.
Axle nut for SRAM T3
SRAM brakepads for Trail and Guide. Sintered (Metal). The backside /...
SRAM Cassette 9-speed. Pg970 11-12-13-14-15-16-17-19 and 21 tooth. (11-21) Or...
11-34
Axle nose wheel for SRAM gear hub - stainless. 20 x 2,5 x 10,6
SRAM Wide/narrow racer chainring for single crankset and 10- or 11- speed cassettes. The Wide /...
Original seal kit for Pressfit GXP bottom brackets. Perfect for the bottom bracket, which isn't...
Brake pads for SRAM's hydraulic disc brakes For SRAM's racer disc brakes HydroR, and SRAM Level TLM...
8-speed twist shift lever Fit only Shimano Gear wire is included.
Original Hoods/grip rubber for SRAM road grip Fits RED / Force / Rival / Apex The price is for a...
Compatible with Shimano and SRAM. PG-850/830 cassette 8-speed and PC830 chain. Powerpack.
11-28 | 11-30 | 11-32 | 12-26
Perfect with the SRAM twist shift. Fit handlebars with a diameter of 22 mm. Length: 70 mm The price...
Fit Sram and Shimano 3-speed With Micro-shift.
Sram Eagle adjust tool. Used to adjust B gap. The tool is used to adjust the B-screw on your Sram...
Sram Axle spacer for BB30 axle. (30 mm) The thickness of the spacer 13 mm. Used on the right side...
SRAM XX chainring 28 teeth BCD: 80 mm 4 holes
Service kit for Sram Elixir 7/9 and Code R. The kit is for servicing brake levers in aluminum.
For 9 and 10-speed ø64 24 teeths
Brake pad for SRAMs hydraulic disc brakes for HydroR and Level TLM and Ultimate. Clip, guide pin...
SRAM bolta for mounting the spider. Fit all MTB, CX and road crankset with a replaceable spider...
The SRAM Force eTAP AXS rear derailleur is made in a new version that can take up to 36 teeth on...
Chainring for MTB cranksets inner chainring 4 Bolt holes Aluminum chainring BCD 64 mm
Sram NX Eagle pulley wheel for 1x12 speed.
SRAM chain Fits all 10 speed SRAM in a quality which matches X5 (MTB) /Apex (Road) 114 links Made...
SRAM spacer for BB30 axle. Width: 15,46 mm. Fits axle with diameter: 30 mm Made from...
Sram chainring for double crankset with 26T Fits crankset with 64 mm BCD. Can be...
SRAM Force 22 / Force1 Brake Caliper. Flat mount mounting. Can be used for both front and rear...
Spacer / adapter for SRAM XX1, X01, X0, GX and XX Gripshift. Placed between the gripshift and the...