Feedback Sport Summit Scale weight Precise weight, weighing down to 1 gram, and with a precision...
The Exustar E-T02 is used to disassemble the axle on a series of Exustar pedals.
The Exustar E-T09 is used to disassemble the axle on a range of Exustar and Shimano pedals.
BikeBrother tool for Internal cabling in carbon frames Used to run internal cables through the...
Plastic clamps for work stands from Pedros.
Use to easily and quickly keep track of your large packages of 50 meter chains. At the top, space...
This tool for mounting or dismounting Shimano Di2 plugs always has to be used, if you don't wont to...
There is no description available for this product.
Force bottle for tools Volumen 0,5 liter Perfect for bringing tools,...
Rotor Wear Indicator Smart wear meter from Birzman for measuring brake discs. This tool allows you...
Force special tool for Internal Cable Routing Comes in a smart aluminum container Use to pull...
Thread puller in Novatech hub with 3 pawls. Made to fit with a 20 mm wrench or clamped in a vice.
Force pedal tool with opening on both sides. The long handle provides a good torque for...
BBB Cone wrench. 28 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several other...
Cable driver set used when you need to pull cables, hoses and wires inside the frame. This tool can...
Pedal key from Birzman. Fits pedal axles of 15mm. Made of metal with comfortable rubber handle.
Pedal key from Birzman. Fits pedal axles of 15mm.
Tool for mounting a star nut in the fork stem. Can be used on both 1" fork stem and 1 1/8" fork...
Unior pedal wrench with 15mm opening. The handle is double dipped for long durability and...
Mock pedal from Birzman. Used to put in the pedal arm instead of a pedal when you need to make...
Revolutionary chain cleaner. Knows the chain quickly, easily and efficiently Complete set with 150...
Tools for precise adjusting and mounting of braking pads. Fits both Road, v-brakes. cantilever...
Curved, hardened cutting edges with lock red rubberized handle grip lenght: 190 mm material: steel,...
Magnetic shaft holder that can be mounted on a vise. It has cutouts for a multitude of...
Bottom ring puller from Birzman. Used to pull the bottom ring off the fork stem. It can be...
2 pieces. Fits to 13/14/15/16 mm Small wrench/key for cone, 2,5mm width
Cable puller from Birzman, also called the third hand. This tool is super convenient when your gear...
Brand new multitool for cable routing on your bike. The absolute must-have, of course with the...
The Birzman handlebar holder is used to make sure your handlebars do not turn when your bike is in...
Cable shears from Birzman. Cuts both wire and outer cable. The pliers have a small hole on the...
Parktool Conus Wrench HCW-11 with a 16 mm wrench and 2 ear wrench with 23 mm in between.
Tool for removing the right cone on Alfine gears. TL-S701
cablescissors for both internal and external cables, made in the best workshop quality from Unior
Designed to remove crank screws and pedals rubberized handle grip lenght: 230 mm, thickness of...
New and improved version of the geardrop align from Park Tool. If you have problems with your gear...
A tool used to install a seal in 12-speed Micro Spline hubs. Can be used on a wide range of XTR,...
Brake Piston Press from Birzman. Used when you need to press the pistons back into your brake...
Smart case from Vittora, can contain for example tubes, tools and other indespensable items on your...
Tool for removing insert on right side of a dynamo hub Fits: DH-2R30/2R35/3R30/3R35...
Used when your current thread is faulty. The gear hanger is drilled to 12 mm, and the bushing is...
XLC brake shoe tuner Places your brake pads completely right. For V-brakes and race brakes When the...
Smart multitool tool from XLC which makes it easy to pull cables through the frame. Can be used on...
Pedal key from Bike Attitude. It has a nice handle which is comfortable to hold. At the top there...
Sram Eagle adjust tool. Used to adjust B gap. The tool is used to adjust the B-screw on your Sram...
Shimano TL-FD68 for adjusting the front derailleur ex. adjusting the cable on...
With this thread tap, it is possible to make 5 mm threads. Fx for bottle cages, fenders among...
If your gear drop is slightly off, even the best adjustment won't fix bad shifting. With a...
Mounting tool for the starnut in the forkstilk on 1 1/8"...
Gear Hanger Alignment Tool, in super quality from SuperB. Easy and fast to...
Rock Shox Rear shock mounting hardware Rear damper mounting tool 1/2 "x1 / 2", 50x8 mm Contains 3...
Tool for removing right cone on Nexus gear. TL-C7001. Compatible with: SG-C7000
The TWB-15 is used with any 3/8" drive torque wrench to verify pedals are torqued to the correct...
Very accurate digital table scale. Perfect for weighing new weight-optimizing parts for the bike...
?Cyclo seat post gauge ?For measuring the seat post and finding the exact seat tube size ?Measures...
For dismounting of headsets. This tool can be used when dismounting the headset mounted in the...
Used to hit head set out of the crown pipe. Used fx. for: 1 1/4" 1 1/2" / 1,5"
Removal tool from Bitul that fits DT Swiss 3 pawls hub. The removal tool is used to...
These cone wrenches are designed for the home mechanic or occasional user. They're made of thin...
Pedros Pedalkey With 15 mm opening, which is standard on pedals,...
Pedros Discbrake tools. Combined tools for both amend disc brakes And spanners in 7 and 8 mm with...
Pedros Headset Conus Wrench. Used on the upper part of the crown tube bearings on forks/bearings...
Tool for removing the E-ring on the brake and shift lever.
SuperB cable cutter to shorten up your hoses and wires Has built in crimper for cable ends...
Tool for cutting BSA threads in the crank of frames.
Tool for mounting taper on Nexus 8 gears. TL-8S20. Compatible...
Tool for mounting the right cone on the Alfine 11. TL-S702. Compatible with:...
Park Tool Cutting pin set for pedal thread 9/16 ". 20 TPI.
Guide for saws when shortening fork stems. Model: SG-7.2 OS
Take the guesswork out of installing cables, wires, and housing inside the frame. The IR-1 from...
Gear adjustment tool MU-S705. TL-SGE1 Compatible with: SG-E500/S705/S7051/S505/C6060/C6061
Head set mounting tool. Axle/Spindel length 360 mm / 16mm Double grip, rubber grip Length on the...
The AV-1 is used in a bench vise to hold the axle and prevent it from turning while making...
The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and...
Unior Bearing drives for 22-28 mm bearings inside.
Cone Wrench 13mm. Can i.a. be used for mounting, dismounting, and adjusting hubs.
Cone Wrench 14mm. Can i.a. be used for mounting, dismounting, and adjusting hubs.
Cyclus Headset wrench 36 mm.for the handlebar
Storage bottle for mounting in bottlecage and can be used for tansporting tubes, patch kit, tools,...
Park Tool call these their offset wrenches because of their unique design, which allows them to be...
Storage bottle to be mounted in bottle cage and used for transportation of tools, patches, tubes...
XLC cable caliper to be used when tensioning cables Single hand use Also useful when tensioning...
Park Tool Frame Tap 15 x 1.00mm Thru Axle. For frames with continuous 15 mm shaft with fine thread.
Replacement blade for the Carbocut hacksaw 10" blade in a very high quality made from Tungsten...
BikeBrother geardrop adjuster that fits from 26 "wheels to 29" wheels. Precise tool made of...
Pedros Cable Stretcher Also called a helping hand or a third hand.
Assembly tool for the star nut that sits in the fork stem on 1 1/8" forks and some 1"...
Thread nipple is used to cut BSA threads in frames. Used with Cyclus tool (720149).
Threaded Hubs used for cutting ITA threads in frames.
PRO multitool, which makes it easy to pull cables through the frame. Can be used on both Di2, gear...
Used for a faulty thread on a pedal/pedal arm. The pedal arm is drilled to M16 and the pedal into...
Used when you have a faulty thread on a pedal or a pedal arm. The pedal arm is drilled up to M16,...
XLC cone wrench 15 mm Used when adjusting hubs among other times. With grips for good grip.
With covered handle for a great grip.
XLC Cone wrench 14 mm WIth a good firm grip
XLC cone wrench 13 mm With handle for a good grip.
Special tool for dismounting the cone on Nexus 8. TL-8S11
Trigger for Lite cassette case Size M44x24T Fits wheels from before 2010.
Unior Bearing drives for 10-12 mm bearings inside.
Unior Hub Genie is a smart special tool used to remove end caps on your hubs without scratching the...
Pedros Conus Wrench. 20 mm. Conus Wrench are used to disassemble the hub, as well as several other...
Smart storage bottle from BBB, which is mounted in the bottlecage. Can e.g. used for...
Remover for DT swiss threaded ring bevelled remover
Cable tool to strip the insulation of wires and access the wire inside. Made of hardened...
Tool for removing the cassette and crank bearings. The arm is 376mm long which makes it easy to...
Cone Wrench 20mm. Used, among other things, for mounting, dismounting, and adjusting pedals.
Pedal wrench 15 mm and 24 mm wrench. The wrenches can also be used for other purposes
Shimano Cable cutter TL-CT12 Can cut both inner wire and outer cables. Ergonomic grip. Extra tool...
Park Tool Frame Tap set for pedal thread 1/2" 20 TPI
This tool gives you a 100% even cut, which is essential for at good stability. Tighten the tool...
Cyclus Conus Wrench. 24 mm. Conus Wrench are used e.g. to disassemble the hub, as well as several...
Tool to remove the shaft on your Look Keo Blade Carbon pedals. Fits left pedal with 5 pins.
14 and 15 mm crank bolt wrench 15 mm pedal wrench
Cyclus Cone Wrench. 15 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
Puller for headsets that are pressed into the bottom of the fork stem. Can be adjusted in many ways...
Set consisting of 5 cone wrenches from BBB The wrenches are 2 mm thick and with a comfortable...
Provides a quick, easy and precise installation. With plenty of spacers to fit just about any hub...
Bracket for shortening tubes like a fork, seatpost and handlebars. Fits tubes from 21 mm - 34 mm...
Codan syringe 50ml Can be used for applying thin grease in the hub or bearing for dosage of oil,...
Shimano inner wire fixing bolt setting tool TL-CJ40 101 - 127 mm Fit measuring on Shimano Nexus 7...
Tap handle for 3/16" thread tap.
Cyclus pedal wrench with 15 mm. opening at both ends. Long handle for better torque with...
Tools used to straighten frames, front forks, etc. Can take pipes up to 44 mm. Can be adjusted up...
Very strong pedal wrench with a long grip, giving you much leverage. Two openings with 15 mm on...
Large cone wrench used fx. for headsets. 30 mm in one end and 32 mm in the other.
Cyclus Cone Wrench. 12 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
Cyclus Conus Wrench. 13 mm. Conus Wrench are used e.g. to disassemble the hub, as well as several...
Cyclus Cone Wrench. 16 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
Cyclus Cone Wrench. 18 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
Commonly referred to as a "4th Hand," the Park Tool Cable Stretcher pulls cables tight for...
Unior Bearing drives for 6.5-8 mm bearings inside.
Used when tightening brake- and gear wire With rubber grip for a firm grip Used by only one hand....
Spanner Lite M35x24T for dismounting a lock ring in the right side of hubs from 2010
The perfect pedal wrench for the workshop, where only the best is good enough. 15 mm opening for...
Unior geardrop align that fits from 20" wheels to 29" wheels.
Cyclus adjuster for gear hanger.
Tool for mounting starnut 1,1/8" The small pipe is mounted on the outside of the steerer and the...
RockShok bleed tool for Reverb
TyreWiz is a very compact pressure gauge that, together with the app, comes with recommendations...
Cone wrench 15mm and 23mm. Can i.a. used for mounting, dismounting and adjusting the hub.
Removal tool for DT Swiss star ratches. The removal tool is used to remove the star ratchet ring,...
Headset tool suitable for 15, 32 and 36 mm. Including chain whip.
Tap handle for 1/4" thread tap.
Versatile special wrench with a closed 36 mm wrench in one end and pins in the other, with a...
Cyclus Conus Wrench, for Shimano 7 gear hubs, among others. 22 mm. Conus Wrench are used e.g. to...
HeadsetFittings Wrench from Cyclus in 32 mm. with a handle.
DT Swiss Sprocket remover for star ratchet. Used to...
15 x 15 Length 340 mm Perfect for tight pedals
Made from Cro-Moly steel for a shop quality pedal wrench made to last. 15mm and 9/16" precision...
Smart and practical key used with electronic gears. It can be used to remove and mount connectors...
Thread cutting tap for 9/16" thread. Consists of two taps. 1 for normal 9/16" thread (right side)....
Special tool for restoring fork legs. Set of two pieces. as shown in the picture.
Stainless steel jaw with rubber handle
Unior Guide to Dorn for starnut/expander (found here). Ensure that it is knocked straight in.??
Park Tool Handlebar holder that keeps the handlebars straight when the bike e.g. is...
Large bearing press set, in the well-known shop-quality from Unior, for professional use. Contains...
Very large and powerful pedal wrench that allows for a large torque so that even the most ingrained...
Handlebar Pressfit threaded bar for fitting handlebar fittings into extra long crown tubes, up...
Small and compact cone wrench for hub and many other tasks. 13 mm in one end and 14 mm in the other.
This size is used e.g. for bottle holder, screens, bag carriers.
Cyclus Cone Wrench. 28 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
Fit Alfine 11. TL-S700.
Pedal wrench from Lezynes classic series. With a wooden grip, that is both solid and comfortable....
Used for knocking the head set cups out of the crown tube. Used, among others, on: 1" 1 1/8"" 1 1/4"
The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all...
Elite Takuin Bottle Storage. Perfect for storing tools, multitool, tube, patchwork, energy products...
Used to mount a bottom cone on forks. Can be used for both 1" and 1 1/8"
To be fitted in the pedal thread, making it easy to use the crankset without mounting pedals. With...
Unior Bearing extruder for 12-15 mm bearings inside.
Large installation kit for dust seals on SR-Suntour forks.
Cyclus Cone Wrench. 14 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
Powerful model. PW4 Professional Pedal key with long arm. Good for workshop use, 2 x 15mm opening...
The tool bottle is perfect for storing all sorts of things that you would like to take with you on...
Large set with professional shop press and studs for almost all bearing sizes. Used fx. to install...
Large set for pulling sealed bearings from the hub, bottom bracket, full suspension systems and the...
M10 is the size used for gear hanger threads, and the like. Perfect for repairing a damaged thread.
Cone wrench in a strong quality from Unior Vinyl coated grip. 2 mm thick 200 mm long. Choose your...
13 mm | 17 mm
A versatile digital scale built to accurately weigh bikes, frames, and components. Uniquely...
Cone wrench from Park Tool Vinyl dipped handle for at better comfort and grip. The head of the...
13 mm | 14 mm | 15 mm | 16 mm | 17 mm | 18 mm | 19 mm | 20 mm | 21 mm | 22 mm |...
XLC cone wrench 16 mm With a good firm grip.
XLC cone wrench 18 mm With handle, ensuring a good firm grip.
Park Tools popular and versatile Head Wrenches feature their proven "Y" head design and all headset...
Very easy pressing tool for pressing bearings into the frame. Can be used with headsets on both: 1"...
XLC cone wrench 19 mm With a good grip.
Cone wrench with 2 x 17 mm and 2 x 22 mm. Same sizes, which is used for Nexus hubs.
Cyclus Cone Wrench. 20 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
Cutter with a handle for cutting BSA threads in cranks.
Pedros Headset Conus Wrench. Used on the upper part of the head tube bearings on forks/threaded...
Pedros Headset cone key Used on the upper part of...
Makes it easy and precise to measure both the inner and outer diameters of a bearing. Can be...
Easily and accurately measures the size and thread of shafts, cones, bolts and spokes. Can be...
Cyclus Cone Wrench. 19 mm. Cone wrenches are used e.g. for taking hubs apart, as well as several...
The CRS-1 offers six inserts with which to install the fork crown race. The bearing surface is...
Pedros Cable Shears. Cable shears in workshop quality. Cuts cable precisely and straight. Cuts...
For mounting and dismounting Shimano's Di2 1st generation Dura Ace plug (7970 - series ) Everytime...
Feedback Sports Alpine weight The weight can be held in the hand when weighing the bike, or parts...
Used to correct blades that have become crooked after blows, shocks, etc. Thin and thick side.
Used to remove the bottom ring, which is pressed down over the front fork stem. The trigger presses...
Special tool for side gear synchronization for Nexus 8
Measures skew in the frame and thereby solves many faults and ensure an accurate bike.
Set of two cutting heads for Unior's thread cutting set for the crank bearings. For both the...
For demounting and mounting of pedals. 15mm pedal key
Smart special tool used to straighten fork legs and ends on the frame where the wheel is mounted....
Handlebar Pressfit For 1" / 1 1/8" Crown tube
Hardened stainless steel cheeks. Wire and cable plier professional Top quality cable plier...
Do you have problems to adjust your gears 100% the error might be a crooked gear hanger. With this...
Pedro's Conus Wrench. 14 mm. Conus Wrench are used e.g. to disassemble the hub, as well as several...
Pedros Conus Wrench. 17 mm. Conus Wrench are used e.g. to disassemble the hub, as well as several...
Used to mill and straighten the contact surface between crank and bracket shell. A complete and...
Bottom bracket tapping tool for BSA threads in the well known high Unior quality. Used when your...
2-in-1 tools to adjust the discbrakes and to press stamps out.
Tool for end plugs on gear cables. TL-S700-B
Easy and precise way to weigh your bicycle. Measures from 200 grams to 50 kg. Uses 3 x AAA...
For mounting headset and pressfit crankcases. Fits headsets from 1" to 1.5", as well as pressfit...
Large tool kit from Wheels Manufacturing for driving out bearings. The set consists of 11 different...
SKS Cage Box includin nylon bag For tools, extra tube, repair kit, pump and so on. Can be in the...
FSA Headset gauge. Used to determine which headset fits in the frame. This tool is especially...
Unior Bearing driver for 17-20mm bearings internally.
Chainring tool from Cyclus for changing chainring.
This tool is made in workshop quality and is used to service Chris King hubs of the types; ISO,...
Shaft holder for placement in the vise. The shaft is inserted into the holder and keeps the hub...
XLC pedal wrench TO-S19. For mounting and dismounting pedals. Size: 15 mm. On each side of the...
Unior Bearing drives for 30-36 mm bearings inside.
Unior Pedal Reaming Taps in 5/8" x 24 TPI. This slotted pin is used before the threaded...
Used for sawing fork steerers or the like. 10" hack saw of a very high quality with a blade made...
Smart storage bottle from BBB, which is mounted in the bottlecage. Can e.g. used for storing tupes...
Used to measure fork stalks, fitting / bearings, angles and more. Can measure fork stalks at: 1 1/8...
Pedros Conus Wrench. 13 mm. Conus wrench are used to disassemble the hub, as well as several other...
Pedro's Cone Wrench. 16 mm. Cone wrenches are used e.g. for taking the hub apart, as well as...
Pedros Conus Wrench. 18 mm. Conus Wrench are used e.g. to disassemble the hub, as well as several...
Pedros Conus Wrench. 19 mm. Conus Wrench are used e.g. to disassemble the hub, as well as several...
Special dynamo tool for Nexus and Alfine.
Pedro's Tool for Star Nut. Mounting tool for the star nut that sits in the fork stem on 1...
Unior Thread cutter for ITA thread. Thread cutter for Italian threads in notoriously high Unior...
Set consisting of two thread-cutting taps for pedal threads. Right and left (links and straight...
Handle to replace a worn or damaged grip on a PRESS-1 Aluminum-grip with brass. 3/8" x 12" thread.
Set with small QR bearing presses and nozzles for most sizes of bearings. Used i.a. to install...
TL-AF10 removal tool for Alfine dust caps.
Thread tap for the rear derailleur hole on a gear hanger. Used fx. when the thread is damaged or...
Cyclus puller for the handlebar fittings pressed into the bottom of the fork stem. Can be used for...
For mounting headsets on the crown tube Fit 1", 1 1/8" and 1 1/4" The color can vary between blue...
Set to drive out bearings. Consists of adapters in different sizes Fits the following sizes: 30 mm...
Special tool for left dust cap on Alfine gear hub. TL-AF30
